This section takes Windows 10 as example to explain how to wipe computer Step 3 Select the external hard drive or SD card you want to erase data, and.
Open Device Manager by right-clicking on the Start button and then clicking the Device Manager option. Step 3: Step 4: In the Device Manager, right-click on the card reader entry, click Uninstall device option.
Step 5: Select Delete the driver software for this device checkbox and then hw Uninstall button to remove the card reader driver. Step 6: Step 2: Then this tool will go to its main interface. After selecting this partition of USB flash drive or SD card, you will see there are many features about partition management.
Here click Format Partition function from Partition Management drop-down menu. Step 3: Click OK to continue.
Step 4: Then run this command tool. In this window, type the following commands one by one and each one should be ended with Enter key:.
Then choose a file system from the list and check Quick Format option. In this case, please ask the third-party write protection removal software - MiniTool Partition Wizard for help since it can quickly perform formatting without any limit to fix the disk is write-protected error.
However, formatting the drive will cause data loss. If you have stored many important files on the device, they are erased.
This process is full format and takes some time, please wait with patience. Such formatting method erases data permanently and you cannot perform data recovery anymore.
You can also fully format SD card or other devices in Disk Management. Method 2: Wait the process to complete.
Method 3: Type diskpart and press Enter key in Command Prompt. Type command list disk and press Enter.
This command lists all disks on your computer. Step 6: Type clean and hit Enter key. Step 7: You can move pictures from your camera's memory card to your laptop via the USB cable.
This will be a bit slower than using a memory card reader [source: Northrup ]. If you decide to use the USB cable you can leave your memory card in your camera.
Your cadd will recognize the memory card and the files on it [source: The Format screen will now appear. You can give the formatted drive a name by entering it into the Volume Label. A warning will appear notifying you that all of the data on the drive will be erased.
Click OK to continue. At this point, your drive should be formatted correctly.
Reinsert the SD card and try to format the SD card again. If this step fails or there is no tab on the SD card follow these instructions: You may need to navigate through the menus to find the Command Prompt icon.
A list of all the available disks on your computer will appear. Make a note of the disk number that resembles the same size as the SD card you are formatting.
News:If your SD card doesn't show up on Windows 10 computer, read on this article to If not, right click the SD card and select “Change Drive Letter and Paths”. lock your SD card before, the first thing is to remove write protection from SD card.
Leave a Comment